Fuel hose clamp for Johnson

[halas]

Where can I buy online the fuel hose clamp strap part # 0320107 ?
Planning to clean the carburetors and to replace the fuel pump and hoses so I will need the new straps.
1979 V4 motor

Is there any other kind of fuel clamp being used for this engine?

 

[bankerjohn]

Re: Fuel hose clamp for Johnson

I'd be interested to find out if the part number you referenced looks like this one:

I've been looking for this kind without any success, other than an eBay seller that was selling packs of 500 a couple months ago!

 

[5150abf]

Re: Fuel hose clamp for Johnson

I have a bunch of little zip ties I have used for years, you don't really need a special kind, just find some small zip ties and you are good.

 

[halas]

Re: Fuel hose clamp for Johnson

I'd be interested to find out if the part number you referenced looks like this one:

I've been looking for this kind without any success, other than an eBay seller that was selling packs of 500 a couple months ago!

I have not seen one yet open but soon will be rebuilding the carbs and will be more involved then.
Thanks for the tips though.

 

[captgm]

Re: Fuel hose clamp for Johnson

Any Marina or Marine dealer should have them. 10 to 15 cents each. Yes All outboard manufactures recommends them and you should use those as they close the gap in the hose 100% with the shape and contour of the clamp.. just replaced my oil/fuel pump and needed 4 of the clamps. WOW a whopping $.60 cents.

 

[jtexas]

Re: Fuel hose clamp for Johnson

I just use regular old zipties -- I've used small ones and larger ones, just whatever I can put my hands on. The hose fits tight enough on the nipple to seal it; the clamp just has to keep it from popping off.

But if for some reason it doesn't seal it 100%, just put two on there.

It's not the 15?, it's the time & trouble of getting to the parts house.

 

[halas]

Re: Fuel hose clamp for Johnson

Any Marina or Marine dealer should have them. 10 to 15 cents each. Yes All outboard manufactures recommends them and you should use those as they close the gap in the hose 100% with the shape and contour of the clamp.. just replaced my oil/fuel pump and needed 4 of the clamps. WOW a whopping $.60 cents.

You are right I called this Monday morning (closed on the weekend) the local dealer and they have the clamp straps part # 0320107
Thanks again for all the tips