Hi, I am new to this forum so please bear with me and thanks in advance. Just bought a boat recently and owner said it had been run 3 times this year. Boat was not idling (kept on putting out), so I brought it to a mechanic, who told me to replace the fuel pump and fuel hose with primer bulb.
So, I replaced the primer bulb and fuel line and seemed to be ok. Also opened up the fuel pump and re-assembled and all seemed to be ok. Also cleaned the 2 carbs completely, and replaced fuel in tank with new fuel.
I got her running, however now I can't get the engine to shut off with the key. In a panic, I pulled the fuel line off and disconected the battery, but it still ran for about 2 mins before finally putting out. Is there something wrong with my ignition swich? Is there a way to put in my own kill swich? How can I prevent this from happening in the future if it is my ignition swich? I looked at the swich and all seemed to be ok. Any advice? Thanks again. -J
So, I replaced the primer bulb and fuel line and seemed to be ok. Also opened up the fuel pump and re-assembled and all seemed to be ok. Also cleaned the 2 carbs completely, and replaced fuel in tank with new fuel.
I got her running, however now I can't get the engine to shut off with the key. In a panic, I pulled the fuel line off and disconected the battery, but it still ran for about 2 mins before finally putting out. Is there something wrong with my ignition swich? Is there a way to put in my own kill swich? How can I prevent this from happening in the future if it is my ignition swich? I looked at the swich and all seemed to be ok. Any advice? Thanks again. -J