after sodablasting

[artysniper]

ok here is the deal , i bought a boat last year and the guy i bought the boat from said he had the bottom soda blasted. its a fiberglass hull , there is some residue left over on the hull . how can i get this stuff off without damage to the gelcoat want it too look like new on trailer. thanks guys

 

[rbh]

Re: after sodablasting

Hello and welcome aboard, you may have better luck posting this in the restoration section. Lots of good info there.

 

[artysniper]

after sodablasting

ok here is the deal , i bought a boat last year and the guy i bought the boat from said he had the bottom soda blasted. its a fiberglass hull , there is some residue left over on the hull . how can i get this stuff off without damage to the gelcoat want it too look like new on trailer. thanks guys

 

[Bondo]

Re: after sodablasting

how can i get this stuff off without damage to the gelcoat want it too look like new on trailer.

Ayuh,.... I'm with Bubba,... You're Dreamin'......

Sand it Smooth,+ Paint it....

 

[ryand895]

Re: after sodablasting

Wipe down with isopropyl alcohol? I haven't used it on gelcoat, but it works great to remove the soda from soda blast.

 

[Bob_VT]

Re: after sodablasting

Wash it and scrub it off. No short cuts here just good old fashioned elbow grease.

Then use a polishing compound followed by a good wax.

 

[Bondo]

Re: after sodablasting

Ayuh,... Arty,... Post your question Only Once, in 1 forum... here's your other 1...

Double posting does nothing but create Confusion....

 

[artysniper]

Re: after sodablasting

thanks guys will scrub . as for the double post someone said move it here and i tried and thats what happened