1994 v-4 120 looper fuel recirculation hose routing

[rohdemedic]

Hello,
I am looking for the fuel recirculation system hose routing as well as the primer solinoid hose routing. i rebuilt this enging and this is the last step in the shop. Not in the manual and I can't find it online.
Thank you
Matt

 

[ezeke]

Re: 1994 v-4 120 looper fuel recirculation hose routing

Should be at the end of section 2 in your factory manual.

 

[daselbee]

Re: 1994 v-4 120 looper fuel recirculation hose routing

Without checking the manual, basically the pattern for the recirc system is this:

1 goes to 2, and 2 goes to 1.
3 goes to 4, and 4 goes to 3.

It is a definite pattern, but don't forget about the bottom to top hose (with check valve) that basically oils the top main bearing.

Primer hoses are very very simple, just route them from the solenoid to the nipples on the manifold. Should be some tees in there to split the fuel flow.

 

[rohdemedic]

Re: 1994 v-4 120 looper fuel recirculation hose routing

Hey guys thanks for the info. I was working off another manual. Wish I would have known about the factory manual earlier. Thank you to both of you guys. I will post later to let you know how the rebuild went. Wish I would have taken more picture.
Matt