krisnowicki
Lieutenant Junior Grade
- Joined
- Jul 11, 2007
- Messages
- 1,172
I graduated law school today. I have =family coming in town tommorrow so I was detailing the boat. I got her all cleaned up and. I thought I would check the oils etc. The OD oil is milky white. So I split the halves ...
The top of the lower where the stainless splines are have oil on the them am I to assume a seal in my upper has blown?
The screw at the bottom was hand tight at best so I was thinking it may have gotten in there. Also, the oil was not totally emulsified just a mix of white and gear oil. So, should there be oil on the top of the splines I do not think so... ?
There is no gear oil in the bellows....
Please help I will be at it all night
This is on a Alpha one gen 1 drive
The top of the lower where the stainless splines are have oil on the them am I to assume a seal in my upper has blown?
The screw at the bottom was hand tight at best so I was thinking it may have gotten in there. Also, the oil was not totally emulsified just a mix of white and gear oil. So, should there be oil on the top of the splines I do not think so... ?
There is no gear oil in the bellows....
Please help I will be at it all night
This is on a Alpha one gen 1 drive