16 foot tourney jon boat build W PICS, ANY ADVICE

PHAT_BASS_TARD

Recruit
Joined
May 13, 2010
Messages
5
Well sold my 12 ft mod v hull to build a bigger one picked this one up for 300 bucks gutted it and starting from scratch sold my 2008 5hp merc and picked up a real clean 65 9.5 johnson in phenomenal shape here in ga some of the lakes we fish have a 10hp limit hence the 9.5. But anyways here we go :D
0418101743.jpg

0418101812.jpg

0418101915.jpg

0424101458a.jpg


first pic bringin it home
gutted all the foam it was saturated in water and heavy
a good cleaning and installing new foam since the boat isnt that heavy i went with blue lowes foam
 
Last edited:

PHAT_BASS_TARD

Recruit
Joined
May 13, 2010
Messages
5
Re: Nicks 16 foot tourney jon boat build

Re: Nicks 16 foot tourney jon boat build

0506101754.jpg

0506101816.jpg

0506101818.jpg

0506101900a.jpg

0506101933.jpg

put in new spouts for the live wells, replaced all the hardware in the plates and started the framing for the casting deck and a pic of the 65 9.5 johnson
 

PHAT_BASS_TARD

Recruit
Joined
May 13, 2010
Messages
5
Re: Nicks 16 foot tourney jon boat build

Re: Nicks 16 foot tourney jon boat build

0509101606.jpg

0511101823.jpg

0511101832.jpg

0511101842a.jpg

0511101900.jpg

built a livewell out of a cube igloo cooler cheap and easy, whole saw through the bottom and bought a extra nut for the spout and siliconed top and bottom of the nut almost dont with the framing have to get 2 more sticks of alum to add a few more supports then should be ready to start decking.
 

PHAT_BASS_TARD

Recruit
Joined
May 13, 2010
Messages
5
Re: Nicks 16 foot tourney jon boat build

Re: Nicks 16 foot tourney jon boat build

just incase anyone had a question on how i plumbed it, gonna use a bass pro ice chest aerator kit and spray bar so it will be all enclosed in there, and planning to run the plug open should only fill to the water line of the boat.(in theory)

0509101606a.jpg
 

PHAT_BASS_TARD

Recruit
Joined
May 13, 2010
Messages
5
Re: Nicks 16 foot tourney jon boat build

Re: Nicks 16 foot tourney jon boat build

0516102023.jpg

0514101954.jpg

0516101850.jpg

0516101827.jpg

0516101900.jpg

got wheels for the trailer, finished the frame for the rear bench to drive from, planning on cutting wood and covering it with carpet will house the fuel tank and batteries, do yall think the front will need any more reinforcements? Im planning on leaving the middle open just wood and carpet, and put a casting seat on the deck and one in the middle on the lower deck? What do yall think?
 

ezmobee

Supreme Mariner
Joined
Mar 26, 2007
Messages
23,767
Re: Nicks 16 foot tourney jon boat build

Re: Nicks 16 foot tourney jon boat build

Lookin' good so far! That's a nice deep jon.
 
Top