Re: FLYWHEEL MAGNETS
hello again<br /> mostly by eliminating all the rest. if the stator,switch box and trigger have all been replaced with known good ones I would suspect the kill circuit is remaining grounded.<br />Try to find the black wire with a yellow stipe at the pack. dissconect it and try to test the spark again. if still no spark I would stat at the beginning with my ign trouble shooting procedures. I have never seen bad mags on that type motor. some early looper OMC had bad magnets on the non vented flywheels . the flywheel is very expensive so I would try to eleminate all else.good luck and post me again about your trouble shooting methods
