OK.Trim would not work this spring so I had the trim motor rebuilt. Put the motor in and the same thing happens......Nothing! I understand that if I hear a click then it is the solenoid. I don't hear a thing. I checked current while my boy pushed the buttons for up,down. I get power to the...
OK.Trim would not work this spring so I had the trim motor rebuilt. Put the motor in and the same thing happens......Nothing! I understand that if I hear a click then it is the solenoid. I don't hear a thing. I checked current while my boy pushed the buttons for up,down. I get power to the...
I have a 1985 Sea Ray with the 3.0 Merc. I need a trim motor. Part number, 88183a11. Can not find one any place. the only thing that will come up is, 88183a12.
Help, please!
My 1986 sea ray is taking on water so I pulled the drive off and watery oil came out. First off I didn't think any oil shoyld come out. Second, the drive bellows is torn, at the connection closest to the outdrive. do I simply have a bad bellows or is there another problem I'm missing such as a...
O.K. I am new to all this boat stuff!! I have a 1986 Searay with a 3.0 Merc 140. I had to rebuild the wood motor mount. So I hooked a com-a-long onto the engine and relieved the pressure of of the wood and the metal front mount so I could remove the bolts. This would allow me to get the wood...
my 1986 sea ray cuddy has a separate panel over the gas tank I would like to make that one whole deck is that recommended. I feel if I do this I will have less chance of water getting down on to my new stringers
Okay I have a 1980 619 foot Sea Ray cuddy cabin with a 3. O Merc cruiser. I have now found out that the transom is wet the stringers are wet. The problem I have is that I did not want to buy a boat for restoration. So now I am in a spot. I guess I could pull the engine out and the stern drive...
I would like to see what shape my transom is in. What do I use to core and where do I do this?
I am sure this is a dumb question, but I am just learning. "the hard way":(
I am repairing my 1986 Sea Ray Seville cuddy, I have cut out the decking just in front of the jump seats up to the back of the back to back seats on each side. I have removed the foam in this spot. However, the foam that goes back to the transom is wet. Do I need to remove that or is there a way...
