GOOD NEWS. . . . The PICTURE UPLOAD FUNCTION IS WORKING !!! The tech folks at the parent company have been able to remedy the issue. You can upload pictures once again. Thank you for your patience.
Thanks Alldodge for your input. I was able to get the boat running and timed. Turns out the distributor was out far enough that ignition wasnt possible. I started over finding TDC and so on. Fired right up. Thanks again
Delco came with two wiring harnesses, one between the coil and distributor and plug with two pigtails one tail (grey connected to the tac wire in the main wiring harness and the other is purple which is from the old coil terminal. I turn the key and measured voltage at the new coil end plug.
Good day all. I have a 1996 Merc 5.7l lx which had a Thunderbolt V ignition with knock sensor. Due to on going issues and cost of module replacement I decided to swap the TB V for a Delco Voyager ignition. I removed the TB V and the knock sensor module, which was mounted at the rear of the...
