I started another thread about this but I was not clear in what I am trying to do. So let me lay it out as clearly as possible. My 190 HP Merc. 470 starter had a slave solenoid and none on the starter. I am now replacing that with a smaller and lighter gear reduction starter that does have a...
I have a 198? merc. 470 190 HP that needs a starter. The one that came out did not have a solenoid on it, yet many other starters that are listed as a direct replacement have a solenoid mounted to the starter. So what to do about the wiring? Use both solenoids? Bypass one? Any help would be...
So I just restored a 1967 Bertram B20 with a 190 HP Merc 470. The prop that was suggested to me by a "pro" was a 15.25 X 15P The boat jumps up on plane and runs great, but the WOT RPM is only 3800 RPM. Manual says max RPM should be 4600. I suppose I should be closer to this range...
So....I have been restoring a 67 Bertram 20 with a Merc 190 HP 470. After fixing almost everything, I am down to one last problem. Boat starts and runs great. Go for a 15 minute cruise, shut her down and then I have a hard start condition. This happens every time the boat is hot. The engine...
So. I have a 1983 190HP Merc. 470. Fresh water cooled with power steering. First time out, I notice no power steering. Pop the lid of the pump and find bright pink liquid which seems to be water and ATF. Does this mean that the PS pump cooler is bad? Is this fresh water or sea water? Can I...
