Just wanted to know how to adjust the carbs<br />because I don't see any mixture screw on the carbs<br />which I think it is running a bit lean because it idles a bit rough and sometime sneezes and cuts out.<br />just trying to make it run better<br />thanks for any help
I can start it run WOT for about a min. then it boggs down and I can pull it back to neutral then run it up to about 2500 rpm and it runs fine but if I go above that it starts to bogg out?? if I pump the bulb it helps but the ball it hard and you have to pump it really fast or it doesn't...
I have this part that is not showen in the service manual it is a metal box about 2" long 1.5" thick filled with and epoxy with three wires comming out. a black wire that is connect to the ground and a purple wire and a yellow or beige wire which both go over to the terminal strip on the other...
I have a 79 200hp Evinrude and have this box that is mounted ontop of cylinder 1 above the starter coil I think it is a Voltage Regulator Kit but I am not sure and what does this do?<br />I see that some tach need this?<br />It conected to one of the yellow wires coming off of the stator and the...
