alldodge's latest activity

  • alldodge
    alldodge replied to the thread Over voltage (again).
    Agree with Dubs voltmeter will confirm If ALT is putting out more than 14.5V then I would look at connections of sense lead and how feed...
  • alldodge
    alldodge replied to the thread Mercruiser 2.5 ticking sound.
    If the noise is coming from a burnt valve than it will show up in a compression test If compression is within 10% all cylinders than...
  • alldodge
    alldodge replied to the thread Mercruiser 2.5 ticking sound.
    Opinion If it was a worn cam lope then the noise from that cylinder would be more then others Have you run the motor without the drive...
  • alldodge
    alldodge replied to the thread Mercruiser 2.5 ticking sound.
    Doesn't sound like rods, more lifter/valve noise Look at the rocker arm nuts, do they all look to be in about the same place? Might...
  • alldodge
    alldodge replied to the thread 2004 4.3GXI-E running rich.
    Fuel rail spec is 50 to 60 psi so your ok there. Try this, turn key on and let it pump up, don't turn key off and watch pressure...
  • alldodge
    alldodge replied to the thread Stuck again.
    I've removed several using a Merc tool and never had one even begin to slip. Have had a few tools which should have been rockwell...
  • alldodge
    alldodge reacted to Bondo's post in the thread best way to repair gimbal hing pin threads? with Like Like.
    Ayuh,...... Maybe, never tried it,..... To be sure, find a used freshwater used helmet,....
  • alldodge
    alldodge replied to the thread Stuck again.
    Is the tool genuine Merc or something else
  • alldodge
    alldodge replied to the thread No start after engine install. Need Help!!!.
    Nice pic but he has a TBV Wire colors are the same, just more of them
Show older items
Top