Current visitors

Home
Members

alldodge's latest activity

alldodge reacted to pnhigg's post in the thread Volvo diagnostic port with Like.

Thanks everyone for the effort. I have still been unable to find anything that will plug in to anything on this engine's harness to...

Jun 18, 2025
alldodge reacted to Scott06's post in the thread Ujoints clunking? with Like.

If you google that casting a bunch of threads will come up but here is one on offshore only - looks like it may cross to moog 315G ...

Jun 18, 2025
alldodge replied to the thread Volvo Penta 4.3.

Sounding like corrosion Yes, you can jump 12V direct to the coil Don't have diagram for pefs only A thru E so here is the E
Jun 18, 2025
alldodge replied to the thread Bravo 3 Driveshaft Oil Seal.
Jun 18, 2025
alldodge replied to the thread Raw water pump seal on 2012 V8 5.7L.

Woops you are in the VP section and I missed that and Scott has your info

Jun 17, 2025
alldodge replied to the thread Mercruiser 3.0L LX - EST Ignition - how to check for proper spark?.

Right now I don't see where you have an ignition problem, it might be incorrect firing order but my guess is it's low compression or a...

Jun 17, 2025
alldodge replied to the thread Mercruiser alpha 1 gen 2 alarm sounding.

Yes it's normal.

Jun 17, 2025
alldodge replied to the thread Ujoints clunking?.

There are auto types for some Do you know your drive serial number, or do the joints have inner or outer clips?

Jun 17, 2025
alldodge replied to the thread Ujoints clunking?.

No don't see that as the issue You had noise under load, replaced gimbal and still have noise unloaded. I would say you need U-joints...

Jun 16, 2025
alldodge replied to the thread Volvo Penta 4.3.

In most cases a diode blows or shorts due to to much current. Something in line with it started drawing more, like the fuel pump or...

Jun 16, 2025
alldodge replied to the thread Bravo 3 Driveshaft Oil Seal.

Should not be any issues so long as you have the Merc manual and tools. Will need a rolling torque wrench and couple other special...

Jun 16, 2025
alldodge replied to the thread Creating a twin inboard 17ft boat.

I call BS

Jun 15, 2025
alldodge replied to the thread Bravo 3 Drive w. a Broken Flange.

Those help absorb the load on the drive. When turning the load increases, so it can be heavy. Don't know what the effects would be over time

Jun 15, 2025
alldodge reacted to Bhuie's post in the thread 99 Volvo 5.0GL with Like.

Any thoughts on what I could have knocked loose ok will do and follow up

Jun 15, 2025
alldodge replied to the thread 60hp 4-stroke merc on muffs.

I don't see that as an issue even if it is a new leak, just not much there

Jun 15, 2025

Show older items

Home
Members

Top