Recent content by Asterope8

  1. A

    Evinrude carb mod.

    I want to find the right size orifice or jets, for a 90hp float chamber that has 140hp carb throats. Im thinking the of getting orifice for a 115hp.
  2. A

    fuel lines

    I would like to find some new fuel lines that are for the choke system. There are four for my 1982 Evinrude 90hp. They go from the check valves located on the intake to the bypass covers.
  3. A

    carb upgraid

    I recently swap my carbs from the 90hp that were 1 3/16 and took the carbs off of a 140hp that are 1 5/16. Is this ok to do with out damaging the motor? I recently read that this is the way to gain more power.
  4. A

    Shifting Problem

    I have a 1982 90hp Evinrude that I recently took apart to paint. After I put it back together, it runs great but will not go into forward gear using the cables. I can manually shift it without a problem. I have replaced the throttle cables and the remote control. Does anyone have any clue what...
  5. A

    parts

    anyone live in sarasota florida that may have parts avaible besides normal work hrs.
  6. A

    Flywheel Nut Size

    I have a 1982 Evinrude 90hp and need to know what size socket I need to remove the flywheel nut. Can anyone help?? Thanks so much!
  7. A

    Air Intake

    Does anyone know if there is any sort of filter I can put on my air intake system in a 1985 Evinrude 90hp? Thanks.
  8. A

    1982 Evinrude 90hp Idle

    Can anyone tell me how to link and sink the idle? Thanks.
  9. A

    1985 Yamaha 9.9hp 4-stroke

    I had my motor tuned in a month ago and haven't run it since. Today I went to start it and it just starts and dies. I had this problem before and cleaned the flywheel, checked the electrical connections, and cleaned carb. I don't know which thing that I did got it start but one, or all, of those...
  10. A

    1982 Evinrude 90hp

    I think there is a problem with my starter but am having trouble diagnosing it. When I turn the key, it spins but gets stuck when trying to move upward. Does anyone know why it would not engage with the flywheel? Should I just buy a new starter?
  11. A

    Adjust Air/Fuel Ratio

    I have a 1982 Evinrude 90 hp outboard. I need to know how to adjust the air to fuel ratio. I also need to know what the psi is for the compression. Thank you!
  12. A

    1965 9522c 9.5 Evinrude

    I just took my flywheel off to replace the coils and now I am having trouble getting a spark. I replaced everything inside but I don't think that I am reassembling it correctly. What is the .020 set point mean? How do I set it and what point do I set it to?
See more
Top