Thanks, that's good to know. If I woulda known that years ago, I would not have built a DVA. However, I do have a DVA, which is how I got the peak DC reading that I did. Thx!
Agree to typically replace the failed component. However, on this particular test, the FSM doesn't state what to replace, where as in the very next step (testing charge coil- leads for shorts) it explicitly states that a "zero reading indicates leads or charge coil- is shorted to ground and...
FSM doe state that the starter needs to be able to turn the motor over at least achieving 300 RPM. So I did run it with a running truck battery hooked up while ensuring the voltage remained 12+ while cranking. Good idea, but starter and battery appear to be working properly. Thx!
I purchased a 1974 Evinrude Starflite 85hp V4 (model 85493) for my son & I's 16' aluminum fishing boat.
After mounting the motor, we cleaned carbs, adjusted linkaged/cables, and fired the engine. It ran well, but didn't have water coming out of the telltale. So we removed the lower unit...
I've been lurking this summer as I've been working on my first boat. I've picked up a lot of great tech via search, and I'm greatful for the knowledge base. So thanks! Now I've got a couple questions.
I've got a 1987 Mercury 116 on a 17' 1977 Lund. When I bought the motor, it ran on muffs...
