I have a Evinrude 48 spl.I have cleaned and rebuilt the carbs, now I need to adjust them. I used to know the basic process but it has been so long that I no longer recall. Can anyone tell me how this is done?
Ok. I have done some trouble shooting. I have disconnected the black wire with the yellow stripe at the power pack and still no spark. I disconnected the yellow wires from the rectifier and still no spark. I have checked the kill switch and it appears to be working correctly. Any ideas? Im...
1994 EVINRUDE 48 spl, model number #E48ESLERD. Engine turns over but will not fire. Checked plug and there is no spark. Battery is strong, fuel is fresh. Any ideas? All help is greatly appreciated! THANK YOU.
Ok, 94 Evinrude 48 SPL. 4 Wire rectifier (3 yellow, one red) 79 Vintage OMC tach new in box with 5 pulses/revs printed on face. Grey wire connected to yellow/grey and black grounded to engine block. Purple wire connected to switched power at ignition. Tach jumps when switch is turned on but does...
Thanks for all of your help, it is most appreciated. On my 48 Evinrude (94 model) you said if it is a 4 wire rectifier it is 5 pulse. My rectifier (round silver thing mounted on side opposite of the starter has three yellow wires and one red going to a black tie block. Coming from this black tie...
I have a 1989 Mercruiser 3.0 with a leaking power steering pump(Older GM Style). Can I replace with an automotive type pump and if so does anyone have a model number. Any help is greatly appreciated.
I have a 94 model Evinrude 48spl that I would like to add a tach too. Other than the tach what do I need, and do I need a certain kind of tach?<br />Thanks for any help.
