howdy folks. im looking to add a 1967 6hp evinrude to my boat as a kicker motor. i have a 74 johnson 115 for the main engine and im looking to connect the steering, shifter and throttle if possible. it looks like there is a spot for a steering connector on the front of the 6 horse...
anyone have the specs for the timing during startup and idle for this engine? the engine seems to sneeze and kickback so that the starter will disengage during startup. i have a manual for a 73 115 but i just want to make sure the specs are the same. also any tips on timing this engine...
when i crank it over it cranks fine till the engine fires and it kicks the starter gear out which will keep spinning until you let off the key. i have to crank several times until the engine will keep running on its own. i will admit the engine is a hair cold blooded but how can i keep...
the idle adjustment screw is all the way in and i still need to idle a little higher. its at about 600 rpm in neutral but when put in gear it will sometimes stall. i have synced the linkages so that at 5deg the throttle cam is just touching the throttle lever and the roller is in the center...
what happens if i dont run leaded fuel in a 1973 johnson 115? thats what the manual says i need. 115esl73m. what does lead do for the fuel or the engine???????
73 johnson 115. on the back of the tach there is a dial that you can adjust for 2 4 or 6 pulses per revolution. which setting do i use with this engine. <br /><br /> also how do i idle the engine down. it idles about 2500rpm with the muffs on. i havnt run it in water yet. my manual...
is there anywhere i can acquire a wiring diagram for a 73 115 hp johnson? im trying to hookup a tach guage (OMC). it has 4 wires coming out of the gauge gray, purple, dark blue, and black. the dark blue is power for the backlight and the black provides a ground for the light but im unsure of...
