just installed a folding tower on my fishing (gw 27) boat. i have twinn 225 evinrudes and would like to run controls on ther tower. how do i rig dual stations?? <br />additionally, have a sea star helm on the tower and a sea star helm in the cockpit, how do i combine the 2 for steering on the...
1994 twinn 225 evinrudes<br /><br />port tach got irratic and then stopped all together. volt meter and gauges were still working . next day gauges stopped also. eng starts and runs fine. <br />checked volts at batt w/ eng off 13.05v<br />started eng and ran it up to aprox 2000rpm and got 14+...
i have 2 225 evinrudes and im going thru the cables and found both of my batt switches are not wired to isolate either eng. dose anyone have a link to a diagram of the proper way to wire twinns with 2 switches. mine is currently -both engines to one batt thru the switches and then 2 cables tie...
port eng 225 evinrude 1994, tach started bouncing around then quit altogether. also getting no power to the port side gauges at all now???<br />any suggestions??
have a 1994 grady white sailfish w/ 2 1994 225 evinrudes. the engines run fine but the port warning horn starts "clicking continuously after the motor starts up. it beeps as it should when you turn the key to on. i have switched horns and the starboard horn dose the same thing when on the port...
do i need to do a rebuild on the carbs when the motors have set up for 8 months without running? i just bought the boat and have only test run it for 20 minutes and it ran great. the previous owner said he used fuel stabilizer and carbongaurd<br />but i know it sat up for 8 months without...
just bought a grady white with twn 1995 225 evinrudes. boat test great except tachs erratic and volt meters pegged out at 18 volts at 3500 rpm. found that the on board batt charger was putting 30 - yes 30 volts to the accessory battery and cooked it. the 2 eng readings were good. am no longer...
