I recently bought a used honda 90hp 4 stroke. It only had 40 hours on it. It now has 63. Sometimes, not always, the engine will only get up to 2000 rpm before stumbling. I can run it that way and it seems ok (except for the lack of rpm). I pull the throttle back and it idles fine. If I turn it...
'92 70 HP FORCE surges slightly at WOT and only at WOT.<br />Starts right up and will run all day. Even runs all day at WOT but surges.<br />I just put new tanks and gas lines and bulbs on boat. HELP!!
hi. i can't remember if an oring goes in the inside groove on the trim/tilt pump. i've had it apart all winter. take a look where i mean you can see it here valve
hi.<br />i would like to know what size the screws are that hold the control cables to the block. i have a '88 125 force. the cables run thru a holder and i misplaced the screws that hold the holder over the cable.<br />thanks!
I wasn't thinking when i was tapping the trim valves out. i forgot to remove the shuttle valve. it is now bent. does anyone have one they want to part with. please let me know.<br />thanks! <br />i took a picture of it shutter valve <br />i thought maybe i could still use it if you think its not...
does anyone have a trim/tilt pump that they would like to sell. i tried to rebuild mine with new o-rings and used 30wt oil and it still bleeds down. i give up.
I've rebuilt the pump unit. It works, but still wants to bleed down about 1/2 way. I've replaced the o-rings. The bore was not scored. It works fine to go up and down. Do I need to cycle it thru a few times as i've cycled it about 6x.<br />I used 30wt motor oil. It is a 1989 125hp.<br />HELP!!!
