Recent content by billjd

  1. B

    trim guage install

    I have 2007 suzuki df115 hp and I see that it is equiped with the trim sender and the wires go up into the engine. Question do i need to purchase a wiring harness or is everything there and all i need is the guage???
  2. B

    planning at low speed

    Question, I have a 16 ft Vectra space deck boat with 115 hp OB. I just installed nauticus smart tabs and I know enough to trim the motor in when taking off and then trimming the motor to vertical once on plane. Question , now do I back off on the throttle to lower my planning speed? I am...
  3. B

    Garmin fishfinder installation Question

    Rather than connect the leads directly to the battery CAN I just place a 12 VDC plug on the power wires and plug the unit into the power point on my console???? Thanks a bunch ! Bill
  4. B

    Teleflex steering question ???

    My boat has a Telefex Safe-T steering system, Question, what does a 3 turn lock to lock for standard travel mean? Thanks a bunch! Bill
  5. B

    transom tie downs

    Question, if your boat , motor and extras weight around 2400 lbs, what rating would you be looking for in a trailer transom tie down ratchet strap. Would a 1 1/2 inch wide with a working load limit of 1300lbs and a breaking limit of 3900 lbs be about right? Thanks a bunch Bill
  6. B

    transom overhang

    I have a Vectra with a glass modified V and a pontoon type deck. I have a 115hp Suzuki . My transom overhangs the bunk boards by 4 inches. I always use a transom saver when the boat is trailered. I moved the winch post up to lessen the tounge weight on the ball which inturn moved the transom...
See more
Top