Recent content by bmies

  1. B

    5.0GL-H w/ SX-A drive: exhaust riser, drive paint, and serpentine belt ??

    First, the exhaust riser. It is a 2007 engine, and I'm due to replace the risers. Unfortunately, corrosion beat me to it. Even though it shows little sign of any issue on the outside, a small hole developed and exhaust is blowing out. The risers are volvo part 3863479, but I found a...
  2. B

    Please Help - Engine Cover/Sunpad Repair

    Re: Please Help - Engine Cover/Sunpad Repair Here are a couple pics of one of the hinges and bolts with the remainder of very corroded nuts. Thanks for any hep you can offer.
  3. B

    Please Help - Engine Cover/Sunpad Repair

    Re: Please Help - Engine Cover/Sunpad Repair Sorry for the poor pics. I brought the cover home with me, and by the time I had the camera it was dark. Its a 2007 Larson Senza and the entire cover was replaced under warranty in 2011, so it is only a few years old.
  4. B

    Please Help - Engine Cover/Sunpad Repair

    I'm taking the family to a rented island home tomorrow, and we can only get there on our boat. This afternoon all six hinge bolts pulled right out of the plywood on the sunpad/engine cover. On the bolts are remnants of what I assume to be heavily corroded t-nuts, and some plywood came along...
  5. B

    Holley 2300 Replacement Parts

    I've searched and read many posts about this carb, but can't seem to find the answer I'm looking for. I've got a 2007 5.0GL-H with a Holley model 2300 carb. The one with the caps over the idle-adjustment screws in the metering block. I hear its a proprietary volvo unit through holley. My...
  6. B

    5.0GL-H Idle Mixture Screw Troubles

    I've got a 2007 Larson with the 5.0GL-H. It has a Holley 2300 2bbl carb (stamped 75030). I have the carb torn down for a full rebuild after the accelerator pump diaphragm failed, and it started dumping fuel onto the manifold. Instead of just replacing the diaphragm, I figured I'd rebuild...
  7. B

    5.0GL-H pulley alignment

    I've been trying to diagnose belt squeal on my 2007 Larson with a 5.0GL-H, have yet to find a solution, and would very much appreciate your help. So, belt squeals at any rpm, changes tone with rpm, and is relieved instantly, for a moment, by a tiny squirt of belt dressing on the leading side...
See more
Top