Recent content by BOAT

  1. B

    reg # on iboat

    whats my #
  2. B

    high speed adjustment ???

    hey I got a 1964 18hp evinrude and can not find a highspeed adjustment nut on the carb. is there one ???. Thanks Bruce
  3. B

    Year of Evinrude + need prop

    Hey i got a old 18hp. evinrude with a serial # 18402d-e07092 I would like to know the year and what prop i need for it (didn't have one on it).also manual for it. Thanks any help would be thankful Bruce--Onieda Lake NY :cool: :cool: :cool:
  4. B

    Lower Unit ?

    Hey.on storing my I/O what is best on the lower unit.Held up or let the trim take all the down.I'm up north so it will be freezing.Thanks Bruce stay warm.
  5. B

    winter time help

    HEY ALL.IT'S ALMOST WINTER TIME HERE IN NEW YORK.CAN I WINTERIZE MY OWN BOAT.IT'S A 140HP I/O FORD.IF SO AND IF YOU GOT THE TIME WHAT WOULD I NEED TO DO.ANY HELP + HINTS WOULD HELP THANK BRUCE+SOON TO BE COLD.
  6. B

    PROP-STILL SLIPS

    HEY I'VE BEEN HERE A TIME OR TOO.PUT NEW PROP ON . NEW HUB ON MOTOR {BETWEEN MOTOR AND TRANSOM )I<br /><br />STILL GET A LITTLE SLIPPING WHEN I GUN IT. LIKE A CLUTCH SLIPPING IN A CAR. WHAT IS THE RULE HAVE THE TILT ALL THE WAY DOWN WHEN TAKING OFF ??.ANY HELP WOULD BE GREAT.IT'S A 1989 140HP...
  7. B

    FORD/OMC-CORBRA MANUAL

    HEY T NEED A MANUAL FOR A 1989 2.3 FORD MOTOR + OMC-CORBRA LOWER UNIT. ITS ON A 1989 VIP 17' THANKS BRUCE P.S. THIS A GREAT WEB INFO. THANKS AGAIN
  8. B

    Hey FON_MAN need help

    HEY PLEASE IF YOU WOULD READ (-BOAT- FORD OMC) I NEED SOME HELP THANKS BRUCE
  9. B

    OMC-(FORD)

    HEY MY 1989 SLIPS WHEN I GIVE IT THE GAS.PUT ON NEW PROP AND STILL DOES THE SAME. I HEAR THIS A RUBBER BUSHING ON THE MOTOR THAT CAN CAUSE THIS ? ANY HELP WOULD BE GREATFUL. ITS A 120HP FORD MOTOR AND AND A OMC COBRA REAR END THANKS BRUCE
  10. B

    300.00 CORBRA

    HEY MY ENGINE REVS LIKE THE ****ENS WHEN I TAKE OFF.JUST PUT A NEW PROP ON.AND STILL DOES THE **** SAME THING . MY ENGINE IS A OMC (FORD) 2.3 CORBRA. REPAIR SHOP SAY IT COULD BE A RUBBER BEARING BETWEEN MOTOR AND OUTDRIVE.COULD THIS BE IT HE SAYS ABOUT $300.00 TO FIX IF THIS SOUNDS LIKE IT...
  11. B

    Help again-OMC COBRA

    HEY TRIED THE NEW PROP WORKED FINE FOR AWHILE BUT NOW WHEN I GO TO TAKE OFF WITH A FAST START YOU CAN FEEL IT SLIPPING .LET OFF THE GAS AND IT SLOWLY CATCHES.ANY INFO THANKS BRUCE ITS A FORD 2.3LTR 120HP?
  12. B

    NEED HELP

    HEY JUST BOUGHT A 1989 VIP WITH A 2.3 LTR. OMC (ford) MOTOR. IT RAN FINE FOR ABOUT 2 HRS THEN IT'S LIKE A CLUTCH SLIPPING IN A CAR .IT JUST WINDS OUT AT HIGH SPEED.BUT AT LOW SPEED I HAD TO GO SLOW TO GET BACK TO THE HOUSE (REAL SLOW).ANY HELP WOULD BE GREAT.ALSO WHAT HP. IS A 2.3 LTR.ON A...
  13. B

    BUYING BOAT

    HEY ANY INFO ON A 1990 GLASTRON 120 HP VOLVO MOTOR THAT I SHOULD KNOW ABOUT.THEY JUST REPLACED THE WATER PUMP.ANY FURTURE PROBLEMS TO LOOK FOR THANKS BRUCE
  14. B

    1950 s WEST BEND ha ha

    HEY I NEED A SET OF PISTON RINGS FOR A 1950'S 16HP ANY HELP ?? THANKS BRUCE
  15. B

    WEST BEND dont laught

    HEY I NEED A SET OF PISTON RINGS FOR A 1950'S 16 HP ANY HELP ?? THANKS BRUCE
See more
Top