Hi all,
First , please forgive me for my english level, i'm a frenchy !
I expose my problem.
I recently overhaull my 454 OMC/Volvo-P Gen 5 1992, engine had 200 hours.
I decided to install a fresh water kit ( Econo cool), after flushed all the dirt between the cilynder walls.
Everything is OK...
Re: 454 engine don't start after camshaft change
Thanks Don S,
I think the picture you show is identical to what i've done, here is a picture of my assembly , i put a white point on the camshaft dot.
The A and B points seems to be a the same place on my engine.
Does that mean my camshaft is...
hi all,
i just overhauled my OMC 454 engine, do valve job, and change the camshaft because of cracked surface on it.
i ordered a marine camshaft for 454 at summitracing.
Everything was ok when i reassembled, untill i put the camshaft in place.
I first put the camshaft with the dot on it to 6...
Re: Replace Volvo Penta manifolds by mercruiser
Thanks all for you precious help !
Instead of Stainless steel tubing, can i use exhaust hoses ?
I'm starting to be borried looking for cheaper manifolds, and i will order the 999$ doug russel packages ... + $730 for shipping to my location.
It's...
Hi all,
i'm from france, so by advance, sorry for my english level !
My boat is a chris-craft crowne 282, powered by a 454 GM OMC with King Cobra on it.
I just pull out the engine because of a leaking oil pan, and i realise i must replace all exhaust manifolds and risers.
Here is my problem ...
Re: King Cobra swap to Sx Dps , what ratio and propellers set ?
HI Don,
Thanks for your quick response!
Yes, it's the cone cluth.
I (think) got everything needed ( see on attached pic), but the bellhousing ( maybe i will need the coupler ? )
if i remove everything but the 454 , i cannot...
hi all,
i'm from france, so i apologize by advance for my english level ....
I have a chris craft crowne 282 , powered by an OMC 454 (carb , 330 HP) with a king cobra on (ratio 1.43).
I realize that OMC parts are NLA, so i want to put a volvo sx DPS on it.
I found a dps sterdrive, in a good...
Hi !
First, i want to apologize for my english level ... ( i'm french )
My boat is a 1993 Chris-Craft crowne 282 , powered by an OMC 454 carburated engine refit in 2005.
It's very hard to find a specialist here in France, that's why i send an S.o.s on Iboat :p
Never had trouble with it, but...
