Current visitors

Bondo's latest activity

Bondo replied to the thread Winterization difficulty.

Ayuh,....... Welcome Aboard,..... You need to have the drive, Off, to put the motor back in, so do it now, then there's no...

10 minutes ago
Bondo reacted to nola mike's post in the thread My block is drained, right? with Like.

Well, gave it another shot today. Nothing. Probed, blew air in there, bow up/down. @Lou C , good thought, will do that next year @Scott...

16 minutes ago
Bondo replied to the thread OMC 4.3 V6 dry joint "batwing" conversion exhaust kit.

Ayuh,...... I donno much 'bout the fitment being discussed here,.... But a couple of comments anyway,.. I can hardly believe Lou...

18 minutes ago
Bondo reacted to rolmops's post in the thread OMC 4.3 V6 dry joint "batwing" conversion exhaust kit with Like.

Somewhere in these pages there is a comment made by Bondo about mixing Mercruiser and OMC/ Volvo parts. He does not think that it is a...

28 minutes ago
Bondo reacted to Dieselmadness's post in the thread Play in steering then found this.. with Like.

So, haven’t had it in the water yet but I just happened to notice the play when my son moved it..just seemed to flop around a little...

Thursday at 12:46 PM
Bondo reacted to ptclabs.jp's post in the thread AD41P Ignition staying on with Like.

Got the new alternators in. did not fix it. One thing I did notice on the port engine *which works properly* is that if you forget to...

Thursday at 11:51 AM
Bondo reacted to Scott Danforth's post in the thread My block is drained, right? with Like.

on a V-engine. the only cross-over point on the block is the water pump connections. everything below that is in their own pocket on...

Thursday at 9:44 AM
Bondo reacted to flashback's post in the thread Cotter pin for Prop...Any one will do?? with Like.

Don't think I've ever seen it spelled with a K. An stainless is fine.

Wednesday at 9:45 AM
Bondo reacted to crazy charlie's post in the thread Cotter pin for Prop...Any one will do?? with Like.

Gonna need a new cotter pin for my Yamaha outboard. I have a Tractor supply store right down the block. A matching size cotter pin...

Wednesday at 9:45 AM
Bondo replied to the thread Strange exhaust behavior during winterizing.

Ayuh,..... Correct,.....

Tuesday at 6:12 PM
Bondo reacted to Scott Danforth's post in the thread cold weather break in with Like.

install rotella T4 15w-40, put a bunch of hours on it to break it in, then change oil and put away for the winter.

Tuesday at 11:56 AM
Bondo reacted to Scott Danforth's post in the thread My block is drained, right? with Like.

Mike, do you have a portable air tank? sometimes you can blow air into the port to clear out the debris the cylinder wall is only...

Tuesday at 10:29 AM
Bondo reacted to Scott Danforth's post in the thread Aquasport 222 Transom with Like.

you can test drill into them and check shavings. however the stringers normally rot before the transom.

Tuesday at 6:50 AM
Bondo reacted to Scott Danforth's post in the thread Aquasport 222 Transom with Like.

You work from the inside, not the outside Your stringers are toast too and the floatation under the floor will be waterlogged Why...

Tuesday at 6:50 AM
Bondo reacted to Scott Danforth's post in the thread Play in steering then found this.. with Like.

pretty sure that is supposed to move. looks like the pilot section of the steering actuator

Tuesday at 6:35 AM

Show older items

Home
Members

Top

View All

View All

View All

View All

View All

View All

View All

View All

Boat Bimini Tops

Boat Covers

View All

View All

View All

View All

View All

View All

View All

Bondo's latest activity

Follow Us