Current visitors

Home
Members

Bondo's latest activity

Bondo reacted to kenny nunez's post in the thread Identifying my mercruiser gimbal housing and ring with Like.

It will not be compatable with a V6 or V8 application. It will work with a 2.5 and a 3.0 as well as the style engine you have. The main...

Aug 8, 2025
Bondo replied to the thread Identifying my mercruiser gimbal housing and ring.

Ayuh,...... Welcome Aboard,....... It'll fit a MC-1, with some compatibility with an Alpha 1,.... It's no good at all with a...

Aug 8, 2025
Bondo reacted to Scott06's post in the thread Knocking when turning with Like.

Only other thing I could think is the orings on driveshaft are getting hub=ng up on gimbal bearing or not greased well. I had a hell of...

Aug 8, 2025
Bondo replied to the thread Were we experiencing vapor lock?.

Ayuh,.... I'm living on an old childhood friend's 1,000 ac lot, 15 miles from town,..... nearest neighbor is a few hundred yards...

Aug 8, 2025
Bondo reacted to JustJason's post in the thread Were we experiencing vapor lock? with Like.

Thanks! I miss New England. Florida has been good to me, but I don't necessarily love it here. I wish I could live in the middle of the...

Aug 8, 2025
Bondo reacted to alldodge's post in the thread 5.7 Switched 12v with Like.

Just guessing but most EFI are 650 to 700

Aug 8, 2025
Bondo replied to the thread Fuel pump issue.

Ayuh,..... It's usually part of the hose barb,.....

Aug 8, 2025
Bondo replied to the thread Manifold/riser 3.0 mercruiser.

Ayuh,..... When you checked the oil, was the oil level higher,..??

Aug 8, 2025
Bondo replied to the thread Volvo Steering Fluid vs ATF.

Ayuh,..... It doesn't matter,..... All of the oils stated are completely compatible,....

Aug 7, 2025
Bondo reacted to Fun Times's post in the thread SX-A Gear Oil Screw with Like.

Impact screwdriver should get it out... https://www.harborfreight.com/6-bit-impact-screwdriver-set-with-case-64812.html

Aug 7, 2025
Bondo reacted to TruDaddy's post in the thread Alpha 1 Gen 1 Upper/Remote Shift Canle Help with Like.

Thanks Bondo. I tested it today on the water it is pretty good. It could be better but maybe its just as good as I can expect for a Gen...

Aug 6, 2025
Bondo replied to the thread Alpha 1 Gen 1 Upper/Remote Shift Canle Help.

Ayuh,..... The shift switch should Never move, shifting Into gear,..... Only when coming Out of gear, in the water,....

Aug 6, 2025
Bondo reacted to Captain Caveman's post in the thread wheel bearing seals with Like.

There is absolutely no reason to re-use a seal. The seals often wear first and cause the bearing damage. Get new seals.

Aug 6, 2025
Bondo reacted to dingbat's post in the thread Let's talk skill... with Like.

Can you dock better than a 5th grader….

Aug 6, 2025
Bondo reacted to Bt Doctur's post in the thread Lower unit not going in gear?? Mercruiser alpha1 gen2 with Like.

unless you also removed the shift shaft itself it will lock when turned clockwise in a straight line and the prop turned CCW

Aug 6, 2025

Show older items

Home
Members

Top