Recent content by capfrank66

  1. C

    1997 200hp Yamaha stalling

    Ok sort of long story here. Had carbs rebuilt last year. Ran fine $2K later. Fogged engines over winter, spring runs fine. sits 1-2 months have issue that will not stay running. Take bowl nuts out spray crab cleaner in, lot of crap came out. Still runs crappy. Take cake bowls off and clean with...
  2. C

    1997 200hp 2 stroke Yamaha stalls right after startup

    My 1997 200hp Yamaha 2 stroke stalls right after startup. I really have not used it this year and started it memorial day weekend and it ran but a little rough figured it was the winterizing. Now just over a month I start it and it will not stay running for more than 2 seconds. start it high...
  3. C

    Yamaha Alarm stopped working

    Well it worked a few minutes earlier and now the alarm does not come on when I turn the key like before. Engine starts but no alarm. Is their a fuse some place? I checked the ones I could find all good. It's a 1997 Yamaha saltwater series 2 S200txrv.
  4. C

    Idle adjustment

    I have a Yamaha 1997 saltwater series II 200hp, code s200txrv. Where do I adjust the idle? It's idling a little low between 600-500rpm and stalls out after a while at idle a bunch.
  5. C

    3208 engine codes

    Re: 3208 engine codes Here are a couple pics of the setup. Turbos are marker M&W. Can anyone tell me much about these?
  6. C

    3208 engine codes

    Just put a deposit on a 1974 35ft Bertram. http://www.yachtworld.com/boats/1974/Bertram-35-2353770/north-east/MD/United-States Took some oil samples this past week waiting on results. One thing i was hoping someone here might be able to explain is they say they are 300hp but when we looking up...
  7. C

    shaft turns in neutral?

    Looked at 35ft Bertram with Cummins Diamond engines. The port side shaft turned real slow even though in neutral. Is this normal? Broker said seen it before but you know those guys lol
  8. C

    3208 oil preasure

    looking at a Bertram with 1987 3208 engines with 200hrs. The oil pressure on the port side read like 40-45 and starboard 70, Let it warm to 120 degrees and same and also port side smoked a lot more than the starboard engine. I'm not a diesel guy is this something to be seriously concerned with...
  9. C

    Oil Alarm issue

    I have a 1997 Yamaha salt water series II 200hp engine. I had an issue with the alarm going off and the mechanic changed the sensor In the tank on the engine. Seemed to fix the issue. After a few trips here the alarm goes off again and I look at the tank on the engine and the level is at the...
See more
Top