Recent content by Cdnguy1980

  1. C

    Propeller

    Is there a specific calculator for that? We have a 16 ft v hull boat, mostly going to used as our own taxi to interior campsites on lakes, and some water fun and fishing too.
  2. C

    Propeller

    Greetings again folks, so after closer inspection and taking the prop off, I found a serial number on it according to some research it's an OEM merc prop 10 x 9. I want to pick up a second one as it's always a good idea, but they don't make them anymore at least from Mercury, are there...
  3. C

    Boat tool box

    Haha if you've ever been to Algonquin park in Ontario Canada I've probably found a few of Davy's tools
  4. C

    Boat tool box

    Hey folks what tools do you recommend having on hand at all times, especially for a 2 stroke engine
  5. C

    Silicone question

    What about sika flex sealant?
  6. C

    Silicone question

    The red is paint the silicone was white but yes horrible color even as a paint job
  7. C

    Silicone question

    The first pic is the inner hull at the bow the highlighted area is where I need to seal, the other two pictures are where the silicone was that I pulled off right where the red paint is. Also is enamel spray paint ok on aluminum if only for just the season? The boat was made by the Mermaid...
  8. C

    Silicone question

    What should I use instead of silicone to reseal the bow plates then?
  9. C

    Silicone question

    They do make some now
  10. C

    Silicone question

    Yeah it was under side step/rub rail as you mentioned, I'm going to leave it still I have the boat paint stripped and then assess. There was some sort of sealant at the seams on the bow on the interior that I will be re-sealing as it was NFG due to time
  11. C

    Silicone question

    Sorry I meant to say it was under the deck sides, as if to keep water out of the hull from under the sides, if I had to guess it's because they are not sealed by welds, it's an aluminum boat from about 1977
  12. C

    Silicone question

    Was power washing my new old boat today and found tooled silicone between the hull and upper deck sides ( where the cleats would be) is this normal? It goes from bow to stern
  13. C

    Boat company name

    Sure did
  14. C

    Boat company name

    As you can see from the pic a lot of info was sanded off when they tried to clear the 3 layers of acrylic paint off
  15. C

    Boat company name

    Yeah mine is a 77 beyond those models and my model is the Monterey 60, it might have been a small Canadian company that made only aluminum fishing boats, hence no results
See more
Top