I have 1977 Chrysler 55 Maga power 2, 2 stroke outboard motor on a 14 Ft glastron tri hull. The service manual recommends autolite 2892 or equivalent. This is a surface gap plug that has no bendable tang to adjust the gap. I bought the boat with autolite 4092 plugs installed have been running...
I have a 1977 Chrysler 55 HP, magna power 2, with low compression in one of my cylinders. How can I tell if it is a ring problem or a blown head gasket or possible something else?
I have a 1977 Chrysler 55 HP, magna power 2, with low compression in one of my cylinders. How can I tell if it is a ring problem or a blown head gasket or possible something else?
I have a 2007 f150 with a dual factory trailer plug receptacle. The 4 wire pins and sockets are 5/16 long. All of the trailer connectors that I have found are 7/16 long. This leaves a gap of 1/8 on 3 of the pins. I do not want to replace the factory plug on the truck. I'm sure it will still work...
I have a 55 hp chrysler magnapower 2 on a 15 ft Glastron with a 32 lb minn kota trolling motor. The owners manual recommends a 70 amp/hp battery for the engine. I have read where some say I should use marine starting battery for the engine and a deep cycle for the trolling motor. At over $200...
