I'm ready to reinstall the lower unit on my motor but am wondering whether to use a sealant, an adhesive, or nothing on the exhaust tube (just behind the water pump) seals. My Johnson manual doesn't describe the procedure.<br /><br />Any thoughts?<br /><br />Thanks,<br />Paul
I'll be reinstalling the lower unit on my 1980 Johnson 60 tonight. Original manual says to use OMC "Moly grease." I've seen both triple guard and white lithium grease recommended here. I also have a jar of high temp anti-sieze compound that I use for spark plugs, though it is probably not water...
Hi folks,<br /><br />I have a lower end leak and have managed to determine that at least part of it is due to driveshaft seals.<br /><br />I've removed the seal housing, and now the driveshaft seems to have an awful lot of play - up and down, right to left, and side to side.<br /><br />Also...
Hi folks, great forum!<br /><br />I have a 1980 Johnson 60hp 2cyl. I drained the lower end as part of pre-season maintenance this weekend and got the dreaded milkshake, a real creamy one. I replaced the oil because I wanted to test the powerhead, and when I filled it I started getting some...
