Thanks Scott. The fuel filter content is fine, checked that previously due to a running rough issue with suspected bad gas. Ran the carburator through my ultrasonic cleaner and the running rough cleared up. The dieseling was pre existing and is still present. I will check fuel pressure
Good morning folks. I have a 2003 4.3 mercruiser. The engine diesels when shut down after running at higher rpms. I would like to check the timing, but not sure what the proper timing specs are. The previous owner replaced the thunderbolt 5 ignition with a delco est ignition system...
Got the transom assembly removed. More corrosion underneath. Plywood around keyhole is quite dry, but still being replaced. All the bolts holding the transom assembly were loose. Not sure what they should be torqued to, but I could easily turn them tighter. Could be why it was leaking?
Hello. Last summer I purchased a 2003 Crestliner Rampage deck boat. There is some corrosion around the bolts on the transom, and I'm wondering what the best method is clean it up. The plan was to sand it down to clean aluminum and repair with marine tek or jb weld and then paint. The other...
