I was in a marine repair shop a day ago, and got to chatting with the owner on the condition of "old" fiberglass boats and restoring them. He told me about, and showed me, a sample of a product called nylo sheet. It looks like the premier stuff for restoring a deck. The company's website states...
I have a 1997 Merc 25 hp 2 stroke that I tiller steer. I would like an 18"-24" extension tiller. What brand will properly fit the tiller grip? I tried one from Wal-mart and it just did not fit right.
Thanks for the info,
Coho Ghost
Gentlemen,
I have a 15 foot Livingston Pacific skiff with a 25 hp Merc electric start. I'd like to get the weight of the battery out of the stern area to up near the bow.
Can I splice extensions to the cables coming out of the motor? What size wire? How should the splice be done? Do the...
I am replacing the brass drain tube thru my transom. I don't have the tool to put the swaged brass type tube in, so I have machined a brass tube with a flange to the outer transom side. I intend to simple bond the tube into the hole in the transom....
and the question is should I use...
Today I obtained a small chunk of the "pink" insualtion foam available from Home Depot in 4'x8' sheets 2" thick. It was marked poly styrene foam. When smeared with a generous amount of vinyl ester resin, it was clearly "attacked" and began to dissolve.
So I guess that type of foam is out as a...
Gentlemen,
Here's what is going on. I have my transom rebuild ready to paint, I thought. (I'm just painting the transom face) Everything I have done up to the last fairing was with vinyl ester resin. The last skim coat on a patch I had to put in the outer transom skin was with System 3 epoxy...
If you are considering a "poured" transom core repair job, I think you will find the NIDA core product to be pretty user friendly, and I hope as time will tell, a very substantial repair.
Once my transom inner and outer skins were repaired, the easiest part was catalizing and mixing the NIDA...
Hi all,
Newbie here. I have a boat that I am doing a new transom on, and among other things it needs a new prop. Here is what info I can provide:
1. No performance issues, just need a new prop. I have never had this boat in the water so I am totally unfamilar with what it needs or how it...
Just joined the forum, and as all "newbies" find, the information here is priceless. I am currently putting a transom in a 1978 model Livingston Pacific skiff. I intend to use the Nida Bond pourable poly/ceramic transom for the re-core. The infor I've obtainned here has made the job a whole...
Just joined the forum, and as all "newbies" find, the information here is priceless. I am currently putting a transom in a 1978 model Livingston Pacific skiff. I intend to use the Nida Bond pourable poly/ceramic transom for the re-core. The infor I've obtainned here has made the job a whole...
