Recent content by Coldbore

  1. C

    Loading onto a roller trailer

    I h ave a Tahoe Q4 which also has a long trailer tongue. The bunks are also long which is why I float mine on the same way. I'm worried that I will put undo stress on the bunks driving it on. Add to it the prop walk on the boat prevents a perfectly straight on approach. 🤭
  2. C

    Tahoe Q4 movement during transport

    I measured the top of the axle to the trailer frame and it is 2 1/2" on each side and no visible damage or scoring on paint so I don't believe it is hitting.
  3. C

    Tahoe Q4 movement during transport

    Thanks for the input. The bunk photo was one I used while centering the bunk thus why it is held by paracord temporarily. It has been secured with a bolt. I guess I should have created a new photo. I will look into those twisted eye straps. The straight down strap on the bow was one sent to...
  4. C

    Tahoe Q4 movement during transport

    I will be refloating the boat today and will try that. Thanks.
  5. C

    Tahoe Q4 movement during transport

    I do not drive the boat onto trailer because it is not steady enough in idle due to stern drive. I float the boat onto trailer then winch the last 3 feet. It centers on stop each time. It just moves after travelling about 30 miles.
  6. C

    Tahoe Q4 movement during transport

    Had this issue since we bought it last year. 2007 Tahoe Q4 w/ 4.3L engine on a Tahoe trailer. Minn Kota Trolling motor installed with 2 batteries on rear to the left of the engine battery. Issue: No matter how we load the boat, the bow moves to the left to where the bow almost comes off the...
See more
Top