Recent content by COURT JESTER

  1. C

    1962 Seabreeze Contessa 1900

    I have the clear plastic for the window already cut out, that i will use the butyl tape so water does not intrude.
  2. C

    1962 Seabreeze Contessa 1900

    I have cut the bunks but will need to look for some mounting brackets. I have replaced the bearings and seals in the trailer axle and will look for some new tires. I have the trailer rollers but have yet to install them. I will need my brother to move the roller brackets. I will post when...
  3. C

    1962 Seabreeze Contessa 1900

    I cut the butyl tape once before and appears to still be oozing out
  4. C

    1962 Seabreeze Contessa 1900

    My bigger Bomar hatch along with my white butyl tape. Don't worry I'm not using that bit. I used it to install the Bomar hatch and bow rail.
  5. C

    1962 Seabreeze Contessa 1900

    This b My forward anchor locker for my anchor and for my Fenders. Its not the prettiest but it'll do.
  6. C

    1962 Seabreeze Contessa 1900

    As much as I would like i would love to run the 1967 Evinrude starflite 100 s but I have a 1999 yamaha 90 2 stroke with 450 hours. I have the side mount binnacle and a 4 blade aluminum solas prop.
  7. C

    1962 Seabreeze Contessa 1900

    Thats the back of my helm pad/station I will cover it up with starboard lite and celtec. I haven't put in the distribution panel nor the battery kill switch.
  8. C

    1962 Seabreeze Contessa 1900

    That is my forward bulkhead made of solid fiberglass. I will use eva foam to pad it.
  9. C

    1962 Seabreeze Contessa 1900

    Those pieces that you see are cubbies that will get cargo net. There all fiberglass and doubles as stiffener for the forward bow
  10. C

    1962 Seabreeze Contessa 1900

    I'm kind of playing with wiring. Those wires are for the bow lights
  11. C

    1962 Seabreeze Contessa 1900

    Stbd side 2 rod holders 1 cleat
  12. C

    1962 Seabreeze Contessa 1900

    My all around light with cleat and rod holder. Its not the prettiest but the paint job is just total boat epoxy primer. I around the corner from 4 years of ownership.
  13. C

    1962 Seabreeze Contessa 1900

    They seem to work
  14. C

    1962 Seabreeze Contessa 1900

    Its a bit dirty but I used epoxy resin with cabosil to bed the bilge pump bracket to the hull
  15. C

    1962 Seabreeze Contessa 1900

    I attached a piece of solid fiberglass to use as the helm station.
See more
Top