Recent content by ctrevis7

  1. C

    Uneven fade under decals

    I purchased a boat that had a name on it and I just removed it because the previous owner requested I do so. So I did! My problem now is the name is faded into the boat! And it's not too noticeable but enough to bother me as I like things very clean looking. I do not have any experience with a...
  2. C

    Overheating at idle

    I have a 2003 yamaha 150 2 stroke. It runs great at high speeds but overheats at idle. Could it be a thermostat if it only happens at idle? I thought it may be the poppet valve but not sure. It pees fine all the time and water pump was replaced this past summer! Ay help would be appreciated...
  3. C

    1987 merc 90 HP full throttle issue

    I ran my boat early this morning on my way to go hunt and it started cutting back a little. On the way back to the ramp I could only get about 5mph at full throttle! Any suggestions?? Maybe a spark plug issue? Thanks in advance!
  4. C

    Trim tabs?

    Looking at buying a boat, I was told that if I'm gonna use it in salt water to make sure it has trim tabs or not to get it? What are they? What do they do?
  5. C

    2004 20 CC Palm Beach w/ 2004 yamaha 150hp 4 stroke in good condition, need help

    I am looking at buying one but dont know very much at all about the palm beach brand. any one have one or know anything about them? do there hulls have any wood in them? Pros and Cons would be awesome! boat does have i guess its called a grab rail? in the front of the boat i guess to hold on...
  6. C

    2006 216 SeaFox CC w/ Mercury 150xl Saltwater series motor

    I am looking at buying this boat just curious to see if any one had any personal experience with them, also what kind of speeds do you guys think i would get out of this combo? any help appreciated thanks guys
  7. C

    1988 1542 Duracaft rivited max hp

    anyone know the max hp these can handle
  8. C

    Wiring around the kill switch

    I have a 1990 25 johnson that the kill switch button on the tiller handlebroke this morning and my motor wont start, any way i can wire around it so i can run my boat? a quick and easy fix
  9. C

    1990 25hp johnson 2 questions

    Today i went out duck hunting and rode down rivers a little and i set up, then after hunting i went down river more and my motor all of a sudden Cut off, i tryed to crank it again and it fired up for 2 or 3 seconds andcut back off and wont stay cranked,What could be wrong? 2nd Question, while i...
  10. C

    1990 25hp Johnson idle problems

    I was having a problem with my motor coughing at slow/idle speeds so i ordered up a carb kit and cleaned and installed it but am still having problems. At high speeds the motor runs great but at slow idles speeds it wants to trun off and cough a good bit which makes it hard to pickup decoys etc...
  11. C

    galvanized trailer painting?

    i have just got a old galvanized trailer that i am looking to paint black, would this hurt the galvanized steel? how would i go about painting it? or is there a way to just shine it up how it is and keep it silver but shine it up some? Thanks in advance
  12. C

    25hp johnson 1990

    i just purchased a 1990 25hpjohnson manual start and am having trouble keeping the bulb firm and primed i dont think its the motor but the hose is brand new what could be my problem? Tank? not enough gas in the tank? i have about 1 gallon of gas in a six gallon tank, alsodoes anyone know the...
  13. C

    1973 johnson 20hp problems

    For some reason my boat feels and sounds like its slipping, so i took it to the mechanic and he said nothing was wrong with it, any suggestions on what it could be? Its my first boat so im kinda worried :( I have a video of it and can email what its doing if someone would help i would greatly...
  14. C

    Prop hub?

    I have a 1973 johnson 20hp and the other day o tried to take itout but the prop isnt spinning the shaft at the foot it but the prop wont. WHat could it be?
  15. C

    submerged 20hp johnson

    today i accidentally submerged my motor while wenching it on the trailer it was under for about 30 sec to a minute i can not get it to start now. i checked spark plugs and didnt see any water. is my motor ruined? what can i do to fix it? thanks so much
Top