Recent content by Dave 2002

  1. D

    Pinion gear removal.

    I am having a hard time getting the pinion gear off the drive shaft of a 1998 120 Force lower unit. Does any body have any ideas.
  2. D

    1998 120 Force lower unit parts

    Does any body know where I can get gears and seals for my lower unit. I am looking or some one that I can call and talk to them about all of the parts that I need. And even a couple of tools.
  3. D

    1998 120 Force lower unit repair

    I have what I beleive to be a 1998 120 Force there are no serial numbers on it but the boat is a 1998. I have the lower unit off and I got both of the studs off but I can not get the carrier to move. I have tapped on the ears and nothing moves, I have a chain puller that wont pudge it. There is...
  4. D

    Steering problem

    I have a 1998 Bayliner trophy out board with rack and pinion steering, it was frozen so I tapped the rod out cleaned the tube and rod and then greased it up. I put it all back together and the rod will extend far enough but it will not retract enough buy about two inches. This is a new boat to...
  5. D

    Where to get the right carpeting for a cuddy

    I have a 1998 Bayliner Trophy 2002 model. I am tring to find a place to buy the loop off white carpeting for the cuddy walls and ceiling. Does anybidy know where I can get it?
  6. D

    Question about buying a boat.

    I am looking at buying a 1991 Bayliner Trophy 2002. I know it need plenty of work which I like to do but the 150 mercury which is a 1998 is bolted to a 1.5' by 1.5' aluminum plate (which is on the out side of the transom) I cant see any cracks on the inside or out side but of corse the aluminum...
  7. D

    Bayliner Trophy cuddy flooring

    Has anybody replaced the flooring in the cuddy of a 2002 trophy? And if you have what is the best way to do it? What kind of wood to use? Thanks for the help.
  8. D

    Bayliner Trophy cuddy flooring

    Has anybody replaced the flooring in the cuddy of a 2002 trophy? And if you have what is the best way to do it? What kind of wood to use? Thanks for the help.
  9. D

    Finding a Vin on a 120 Force

    Hello everyone I am trying to find the VIN number on my 1998 120 Force at least I think it is a 1998 until I find the VIN I may be wrong. Does anybody know where it is located?
  10. D

    Oil mixture

    I just bought a 1998 Trophy 2002 with a 120 Force on it. I was told this was the original motor to the boat. I dont know how and where to mix the oil with gas. I see on some Trophys there is a oil tank above the battery but my boat does not have one. Do I mix the oil rightin the tank with gas...
  11. D

    Need Assistance on Measurments for 1998 Bayliner Tropy

    I just bought a 1998 Bayliner Trophy and it needs some work. I have a guy who will make some covers out of plexy glass for me, I just need the exact measurments for: 1. Cover over the instrument panel. 2. Cuddy door cover. Please help if you can! Thanks, Dave
  12. D

    Finding parts fo a 1998 Trophy 2002

    I just bought a 1998 Bayliner Trophy project boat and need help finding parts, such as cuddy doors and Plex cover, seat pads and more. I got the part numbers from the bayliner customer catalog, but now I cant find them new or used.
Top