I bought a boat and had to rebuild the motor. The boat shop I bought my parts from said I need to turn 5500rpm @ WOT on my 1996 johnson 112 spl. The boat is a 96 wellcraft CC. I turn 5000rpm @ WOT with a 13-3/8 x 17 ss prop.<br /><br /> From what I have read my best option avaiable is a 13-3/4 x...
I have a 1996 Johnson 112 special. IM removing the powerhead and I need to know if the exhaust comes out with the powerhead. Do the exhaust covers and that bubble cover have to be separated for the powerhead to come out and how about the thermostat housing, Does that come out with the...
I just pulled the head and found the exhaust side of my omc 112 cross flow piston was warn or burnt and the rings look snapped and I have no commpression. <br /><br />Somebody told me I shouldnt be trolling with such a big motor and that problem. Is that a true statment?? All the other cylinders...
I have a 1996 johnson 112 special, 90deg cross flow 4cyl.engine. <br /><br />I have no power under load and its spits and farts but seems to start and idle.<br /><br /> Looking at the back of the engine, the top left cylinders plug is black with alot of cheese on it. I thought I fouled a plug...
IM looking to buy a lower end chartplotter to help me navigate around the Long Island sound area while Im fishing. I was looking at the Standard Horizon cp150 for around $400 plus the detailed chart(c-map-nt)for my area for $200. There are two other models in my price range, the Raymarine...
IM looking to buy a lower end chartplotter to help me navigate around the Long Island sound area while Im fishing. I was looking at the Standard Horizon cp150 for around $400 plus the detailed chart(c-map-nt)for my area for $200. There are two other models in my price range, the Raymarine...
I have a 96 johnson 112hp. I pump my primer ball until its hard and start the motor and it runs for a while, then stalls and the ball is soft. If I pump the ball once in a while it stays running. Fuel filter looks clean and fuel line and primer ball look good too. <br /><br />Does anyone know...
