I've read all the stuff in the sticky at the top from Don S. I've read my Mercruiser manual and think I generally understand the switch and shift mechanism.
Is there anyway to test the shift interrupt in the driveway with the muffs on ? I know it needs water load on the prop to work properly...
I have an '85 Sea Ray (230MR Merc sterndrive (305)) that I recently replaced the bellows and lower shift cable (among other maintenance). I took it out today for the first time since I purchased, and all went pretty well. One problem that I noticed....the shift cable is rubbing/chaffing on the...
I've got an '85 230MR in a Sea Ray (a couple months old to me) and have been replacing/fixing various problems throughout the summer. While ordering parts, I noticed some parts will fit both, while others won't. My question...when were the Alpha's first produced? So that means my 230MR is a...
I'm in the process of replacing bellows, gimble,etc. for my Merc. MR. The hose that came in the kit was 5/8", but I need 3/4". It's the weekend and the only thing available is heater hose from the local Autozone. Can I safely use this single reinforced hose or should I wait and look for...
Disappointed...bought a '85 searay a couple months back. Spent the last month or so working on the misc. problems to get it water ready. Wife and I took today off to drop it in the lake for the first time. After dropping in the water, I popped the engine cover and noticed water in the bilge...
Have a recently purchased Searay with 230MR mercruiser. It has a knock from the coupler area inside the boat while running with muffs in the driveway. To date I've replaced the ujoints, checked the upper gearbox gears for chipped teeth (none), checked and realigned gimbal bearing with a proper...
I've recently bought a '85 Sea Ray with a 230MR. During idle there is a knocking noise at the back of the engine/transom area. I went ahead and removed the outer drive and fired the engine. THe noise is not there.
THe u-joints feel tight and the gimbal bearing feels smooth. THe seal behind...
