Recent content by doors67us

  1. D

    Power head swap

    Hey Guy's, I'm going to be doing a power head swap,ona 1992 Evinrude 9.9 ,my question is,will a 1977 9.9 power head interchange with my 92? I know the ignition components are totally different, carburetor is different,but other than that,will it work?
  2. D

    Power pack recommendations

    Hi All,I have a 1977 Johnson 15 HP, think the power pack is going out,it'll run for 10 minutes or so and shut off,new coils, plugs,is there any good quality power packs, besides OMC or Sierra? Any advice would be appreciated
  3. D

    59 golden jubilee 5.5

    What's the chances of the shifter fork being bent or out of shape?
  4. D

    59 golden jubilee 5.5

    What do you mean by precisely grind? Grind what ,I don't see anything that's burred up or galled,the gears and clutch dog actually look like they're in good condition
  5. D

    59 golden jubilee 5.5

    03033401 part # got it from eBay
  6. D

    59 golden jubilee 5.5

    Hey guys ,Im having an issue with my 59 Evinrude 5.5 , shifting,it goes into reverse and neutral,fine but don't stay in fwd gear, unless you hold the shifter,I replaced the shift rod,clutch dog looks fine,the cradle looks decent ,gear set is in good condition,the spring for the shift rod is not...
  7. D

    Leaking Carrier bearing

    Hey guys, I've been working on a 79 Johnson 15 HP,did a tune up ECT,new gear case seals,but now it's leaking on of bearing Carrier,and I'm not sure why,any suggestions or tips ,I'd greatly appreciate it
  8. D

    Temp control/sensor

    Lol I have no clue,that's why I posted it, never seen this on an outboard motor
  9. D

    Temp control/sensor

    So it's not a factory/OMC part I'm assuming?
  10. D

    Temp control/sensor

    Hi guy's,I bought a 75 Evinrude 15hp and this was attached to the power head, I've never seen anything like this,just curious if anyone knows what it is and what it's function is ? I've taken it off ,it was attached to a 4 or 5 pin connector,just curious that's all
  11. D

    74 Evinrude 9.9 recoil

    Thanks
  12. D

    74 Evinrude 9.9 recoil

    Hey all ,have a question, I removed the starter recoil to replace the rope, the recoil spring has unwound,how do it retention the spring,and keep it all together and be able to put the recoil assembly back in the motor?
  13. D

    Evinrude 9.9 lower shift rod

    That did the trick,it's back together and seems to be working properly
  14. D

    Evinrude 9.9 lower shift rod

    Yes lower unit completely taken apart new seal kit installed
  15. D

    Evinrude 9.9 lower shift rod

    It's a clymers manual I think I'll try your advice tomorrow hopefully that solves my problem,cuz it's got me frustrated
See more
Top