I've got a 1967 18 HP evinrude fastwin motor I'm having issues with. It's run great but has always had a slight problem. At full throttle for tweaty seconds or so it starts to die down until the motor shuts off, just like if it weren't getting fuel. After it does this, it is hard to start. I've...
I'm unsure what size battery I need for my boat so here's the low down. It's a 15ft Gregor with a tiller operated 18HP fastwin. The battery would need to power a 30 lbs thrust trolling motor for a minium of 8 hours at half thrust as well as auxiliary lights for a 15 minute period in the morning...
I'm looking for a used Jet outboard but can't find many of them out there. I've searched e-bay and local craiglist. Does anyone have ideas? I don't want a new one or near new one so something in the less than $2000 range for a 35 HP or higher.
Thanks,
He guys, looking for some advice. I'm thinking about purchasing a 16 foot fiberglass boat with a Force 1996 40 HP motor. According to the owner the motor does not run and per the boat mechanic the Power Head has a problem and is not worth fixing. Does this sound accurate? The boat is $550 and...
Hey guys, I want to get some thoughts on this. I have the opportunity to purchase a 1959 16 foot glasspar with a mid eighties 40 horse johnson. It has solid floors and transom and no patch holes on the boat at all. The only issue I see is that it was repainted but very badly and needs...
heres the questions. I have a 2000 jeep cherokee that I bought the adapter to have a four prong wire harness to connect to the back of the tail lights. This is all wire up and I just replaced my lights on my boat trailer and I still have the problem of my left trailer light not working with...
Looking to possible put camoclad on my 14ft aluminum boat. I want to know how easy this product is to apply or maybe a similar brand and how does it look if you go over rivets on the exterior?
I have a 76 klamath that I would like to do the roll and tip method on using interlux paint. Is there any problem with doing this on aluminum? This will be for the outside of the boat and another concern of mine is the amount of rivets that I will have to roll over. Any help would be appreciated.
Hey guys, I'm currently working on my 1976 Klamath 14' foot aluminum boat this winter and would like your suggestions regarding the inside finish. I have tore off the seats and started to sand the inside. I will proably be spray painting it. What colors should I use. I was thinking of going...
Have an older galvanized trialer that I want to clean. I don't want to paint it and will not be putting it in salt water. Just looking for the best method to get some of the old dirt and grease off.
I have a 1976 Klamath 14ft Aluminum boat that I have questions regarding what I should do with the inside of it. It currently has three bench seats and the inside is painted camo. I'm in the process of sanding the outside to paint it a different color other than camo and didn't know what to...
