Hi everyone. Just more of a because i wanna know question lol. I have a 92 maxum sr1900 . Nice boat in great shape for its age. Was curious about how they built it, more specifically how the supporting structures are built is the 4cyl and 6 cyl boats constructed the same. Are the stringers...
Hey everyone I have a question I'm looking at mounting a piece of nylon to the transom of my boat to use it like a stern saver I do not want to screw into the transom so I'm looking for the best glue possible to hold the nylon to the boat I know stern saver product uses in an adhesive but I'm...
hey everyone picked up a new to me boat 92 Maxum bow rider 3 liter Mercruiser trying to figure out how much horsepower it has .
Research for the past couple days and found it there was technically 3 3 liters
A 3 liter LL 115 Hp
A 3 liter L 115/135 hp
A 3 liter lx 135hp
Now I'm pretty sure...
Wife and I are looking at a new to us boat ours bit the dust this winter. First boat iS a 1993 20ft Chaparral 1900 bowrider it has the 4.3 Yamaha setup this boat looks extremely well cared for. Second boat is a 1992 17ft Maxum bowrider it has the 3 liter Mercruiser setup it also looks like is...
Hey everyone picked up a new to me boat on thursday.
Motor is a 1990 90hp mariner
Have a few questions. Frst guy could not keep it idleing. So i played with a adjustment screw where they all connect on the motor seems to idle now hope i turned the right part.lol. Not sure what that part is...
Hey everyone I have a 1984 Larson Delta conic with the Volvo Penta AQ 125 motor my problem is I can fill the coolant for the motor and as long as I do not reopen the coolant side the level will stay fine but if I open it when warm I sometimes find the coolant level drops and it pours out the...
Hey guys I have a 84 Larson delta conic with a Volvo Penta AQ 125 and the 280 Drive problem is when the boat is put in gear the lower unit will lower it so down to normal drive this is very frustrating especially in weedy or shallow areas not exactly sure where to look any help would be...
Hi everyone. I picked up a 84 larson delta conic with a volvo setup aq125 with the 280 outdrive. I have no suction trying to pull water from a pail. Need help with this. Impeller is there. And I n ok shape. Will be replacing it. Noticed the pump drips from behind hooked up hose to water...
Decided to get to a motor I picked up a few years back. Hooked it all up and had no spark. I swaped over a spare cdi still no spark , so I cleaned points and now I get a motor that wants to start but wont. It also sometimes has a bad backfire thorugh the exhaust. Im a lil stumped. I will be...
Re: doral outboard transom replacement
If im gonna cut the old girl could i get the lines shown to me please.. Was checking out furthers restoration thread great info in there
Hey guy need some advice or help here.. I can pick up a 15ft doral for free from a guy but it needs a few repairs.. There is a small soft spot in the floor i know how to go about fixing but after having a look at the boat i found the transom to be a different story.. The top left corner is...
Hey guys i have what im hoping is an easy fix.. Im looking at picking up a doral to put my 1972 chrysler 70hp on... But this boat uses the newer steering that bolts to the transom clamps and uses the stainless rod to turn the motor.. The boat i have uses the older style. the cable is bolted to...
Hey guys i have a 1972 70hp chrysler outboard and im looking at purchesing a chysler valliant to put it on.. I dont know nothing about the boat yet other then it looks in great shape... My question is ... Is the hull of this boat rated for a 70hp motor?. Or is it rated for the smaller motors...
