Re: 1983 55hp timing
ok,i think i get this.the manual calls for full retard position to be at 2 degree btdc and fully advance to be at 32 degree btdc so in order to get the fully advance position to be at 30 degree btdc instead i should be looking for 0 degree btdc at full retard position...
i have a 1983 chrysler 55hp,2 carb set up, with the prestolite cd ignition and i had a few timing question i thought someone might know?i just did a rebuild on the engine so i have to redo the timing.the clymer manual says to put the trigger in the full retard position while cranking with a...
just tore my engine down to replace all the gaskets as they where original and most where leaking,upon taking it apart i found a crack almost all the way across my top end bearing on the crank so i got a new one and removed the entire crank to inspect the other bearings and races,they where ok...
does anyone know the correct flywheel nut torque for an 83 chrysler 55hp model # 559v3s i've got 2 differnt manuals and both of them give a different torque but neither one specificly list my year or model number,just the horse power? also when installing the woodruff key should it be tapped all...
