Recent content by edgarop

  1. E

    1973 evinrude 115 overcharging problem

    hey i have a 115 that is charging at 17 volts from mid to high rpms and at idle it charges at 14 volts. whats wrong with the motor? thanks
  2. E

    how to intall a telltale pee stream on a 1974 6 hp johnson

    im looking to tap a hole somewhere to get a telltale stream for a 6 hp johnson 1974. does anyone where to tap or have you done this?
  3. E

    1974 6 hp ignition problems

    I have a 6 hp it does not fire on the top cylinder. what do i do? how can i check the ignition. It has 90 psi on top and 85 psi on bottom so compression is good.
  4. E

    1974 Johnson 6 hp weak to no water at idle HELP

    i have a 6 hp 6R74 johnson that i put a head gasket, impeller and thermostat in as well as new exhaust housing gasket. The problem with it is that it doesnt shoot water out at an idle but when throttle up the water shoots well after a couple of seconds it first comes out steaming then cools...
  5. E

    1973 evinrude 115 timing problems

    hello first time posting, I just got a 1973 evinrude 115 it was running good at 2000 rpm+ but bad idle. I adjusted the throttle plates and go it to idle at 800-900 in nuetral but i dont know what the problem with the timing. I check the flywheel with a timing light and reads about 10-15 degrees...
See more
Top