30 HP Mariner Electric Start 2 cycle. Has a push primer like a lawnmower. The rubber bulb is broken and I need a new one. Anyone tell me what the part number is and where I can get one and how much they cost....and any other info I might need. Thanks for the assist. The serial number is 06268465
Put my 98 Yam in the water this weekend. Launched fine and ran about 500 yards to dock. Alarm came on. Checked water pisser and good stream coming out. Cranked up put in gear will not get going. Shut down and loaded up. While on the trailer if you put it in reverse you can feel it go in...
Just purchased the Merc and will need to replace the lower unit. The numbers on the motor (3822093) indicate that it is a 1974 year. It is a 3 cylinder. It is a standard 20 inch shaft. My question is what lower units will fit this motor?
I need a cowling for a 1975 75HP Johnson or Evinrude. I also need a cowling for a 1998 Yamaha 80 HP outboard. Does anyone know what years and HP will fit and does anyone know where to come by these items? I can be reached here in the forum or at dbowman2@cox.net. Thanks in advance for any...
I have had the subject outboard for all my life. Bought new. Son dropped it the last trip to the pier and broke the tube that holds the yoke on that hold the clamps to the transom. Need to find: another parts motor, or pieces part to fix it. Model No. CD-23E<br /> Serial NO...
I have had the subject outboard for all my life. Bought new. Son dropped it the last trip to the pier and broke the tube that holds the yoke on that hold the clamps to the transom. Need to find: another parts motor, or pieces part to fix it. Model No. CD-23E<br /> Serial NO...
Hi Richard<br />Have had a computer crash and lost your emal. Need more parts/pieces. Read this and email me please. Just rebuilt two pumps for early tilt trim and willing to share. Thanks
Got the boat in the shop. Here where I live we have no real winter........just a wet mushy season. The transom on the boat is weak and needs replacement. This will be my first time to do this and I have not the knowledge to proceede. Can someone give me a general ouline of what has to be...
I have a 1975 model 70 HP Johnson Electric Starte OB. I need to change the powerhead out. I have access to a powerhead that came off a 60 or 50 HP I think. The model number on this powerhead is 60ESL70D. Will this fit on my 70 HP. It appears to be the same PHead?????Thanks :)
I have a 1975 Johnsons 70 HP. I have the trim that is mounted outside the trnsom brackets on the starboard side. I have replaced the motor and the resevoir and the valve body. Still no trim. Pump motor works good and valve body is pushing fluid. It appears to me that the valve in the...
I have the tilt and trim that is outside the transom bracket. Have replaced the motor, resovoir and the valve body. Have determined that the culprit is the valve in the starboard cylinder. Any other ideas? Seek a used valve or cylinder. This would be the one that does not house the sending...
I have a 20 gallon tank that is built in the bow of my bass boat. It has a 3/8 inch fuel line that comes from the tank fitting and goes to the motor at the back of the boat. The bulb does get any gas to the back of the boat. Changed bulbs and still no gas......Cap is vented......Only thing i...
My Johnson has the tilt trim that has the two cylinders outside the transom mounting bracket. The pump and motor are also outside the brackets. I need to rebuild or get some newer cylinders. I have not been able to find a rebuild kit and have not been able to find a pair of used...
