Recent content by flangler

  1. F

    mid range power/power in and out

    So, i jus recently converted my 20hp Evinrude(93') to a 30 hp. All went well. At that time I replaced the tank, all fuel lines inside the cowl and out, added a water fuel seperator, rebuilt the fuel pump, and rebuilt the carb. Ok and also added a inline fuel filter. Ok, so what is happeing is...
  2. F

    93 20hp to 30hp

    I've looked around and saw a few threads about the topic, but nothing really answered my questions. I've been doing a lot of research and comparisons of schematics, and there is real only two things I know I need to change, and one I'm not sure of. So I know I need to change the carb and...
  3. F

    2006 Johnson 9.9 2-stroke

    I just picked one of these up for $700. I think it was a great deal. My question is are they a good motor? any draw backs? And is there anything I could do to up the performance? Not looking to go crazy. Anybody have any input? Thanks
  4. F

    93 Evinrude 40hp tiller

    Looking at this motor, and was wondering if its a good buy. Are there still parts available for it, and is it easy to work on? Can you get any part for Evinrudes now days? Any info would be great! Thanks
  5. F

    Spark plugs M9.9B2

    Which plugs should be used for this motor? The ones I pulled from the motor are BP7HS-10(0.040). On iboats website they state it should be running B7HS-10(0.032). The difference is the gap. Under the cowling it says to use B7HS-10 gaped at 0.040. I'm a bit confused. Any help is appreciated.
  6. F

    Height of 9.9 tohatsu

    Re: Height of 9.9 tohatsu So here's a pic I forgot I had taken today. As you can see the anti-ventilation plate is lower the the hull, but the upper plate is pretty high. Maybe because it's a tiller motor and there's more weight in the back of the boat it sits lower. Is does look a lot like the...
  7. F

    Height of 9.9 tohatsu

    I was reading another thread and it was talking about the height of your upper plate on the motor. And that the water should be passing just beneath it to prevent drag. However I was running my boat and noticed that my upper plate is below the waterline. Should it be just above the water line? I...
  8. F

    9.9b2 cam swap to 15

    I have already swapped the cam and was curious if there is anything else needed to do. Thanks!
  9. F

    m9.9b2

    Does anyone know where I can find a carb rebuild kit for this thing? My need vavle went bad. I know there has to one out there!
  10. F

    Tohatsu M9.9B2----->Struggling under load<-----

    Hello, I'm new to the forum and new to outboards. I got this motor for 400 dollars and its super clean. Starts first pull and idles great. I changed the lower gear oil and entire fuel system(lines, filters, etc...) I even cleaned the entire carb inside and out and replaced the diaphragm...
See more
Top