Recent content by Freebo

  1. F

    Question about 24V Trolling motor Wireing... Voltage/Amps/Distance

    This might intruige some... OK.. I have a 19ft tidecraft and am replacing a Pinpoint trolling system w/ a Minn kota... both 24V... looks like the PP had 2x 12V+ and 2x 12V- (approx 8ga) wires from the rear of the boat (batteries) to the front... My brother believes that we should jumper...
  2. F

    No Trim under power 90HP Rude

    I have a 88model Ev 90hp my TnT will not work when the boat is running at WOT it's like it doesn't have the power to push the foot back against the tourqe of the prop.... it works fine at idle speed ... if I don't have the motor trimmed all the way down when I take my hole shot.. the motor will...
  3. F

    question about RPM's and T&T J50BELCDE

    Gentlemen, took "Big Ugly"(1985 16ft Starcraft w/front and rear homemade casting decks (heavy)) out Saturday and w/ my GPS clocked it on smooth water @ 31-32mph @ 5600 rpm's at Full Throttle I'm not sure what the "norm" for this motor is.. (that is my first question). My motor does not have...
  4. F

    Correct PP and Coils? - J50BELCDE

    Guys need a little help here...I'm not going to run through the entire ordeal that i've been through here..Lets just say that after all the trouble shooting (months) I've decided to replace these parts... It looks like these are the original Ppack and coils on this motor. and whether they are...
  5. F

    1985 Johnson 50HP Cutting out/Bogging down

    Gentlemen, I have a J50BELCD w/a Cutting out problem that has progressed to a Bogging down problem. The motor originally would get on plane fine then would sharply cut out. This problem would persist for the first 20-30 minutes then dissapear. I figured that it was sucking air from somewhere and...
  6. F

    1985 Johnson 50HP Cutting out/Bogging down

    Gentlemen, I have a J50BELCD w/a Cutting out problem that has progressed to a Bogging down problem. The motor originally would get on plane fine then would sharply cut out. This problem would persist for the first 20-30 minutes then dissapear. I figured that it was sucking air from somewhere and...
See more
Top