http://www.sschapterpsa.com/ramblings/Rebuilding_fuelpump.htm[/URL]Hey guys, quick questions. Just rebuilt the fuel pump on a 1975 Johnson 25hp tiller. I know there are a thousand ways to mess up the rebuild and a quick way to check if you did it right is to blow into the fuel outlet to see if...
Hey all,
my motor is very very slow to pick up speed. after about a minute or more of wide open throttle my boat is semi close to planning out. The boat used to get up and go real well but now after i rebuilt the motor im having problems. Lastnight i was coming back to the dock after duck...
Does anyone know what the proper procedure is to set the points? I turned the cam until the points were on the set line of the cam and adjusted them to .20. Does it make a difference if I have the throttle in the wide open full throttle position or in the slowest position when I set the points?
can someone help me please. this might be a dumb question but how do you assemble a replacement coil on a 1975 Johnson outboard 25hp? It looks like you have to shove the spark plug wire into the coil and a little metal needle pokes into the center of the wire. on the other end of the wire that...
I have a 50hp 500 Mercury outboard that I can not get the lower unit back on. I have read many of the other peoples comments for dealing with this problem and have tried many of the suggestions but cannot get the lower unit back on. I took the lower unit off with the throttle in neutral. When...
