GOOD NEWS. . . . The PICTURE UPLOAD FUNCTION IS WORKING !!! The tech folks at the parent company have been able to remedy the issue. You can upload pictures once again. Thank you for your patience.
Gents,
If you would replace an older D6/370 EVC-D engine for a newer D6/370 EVC-E3 version, what would be required to be transformed regarding the trim system (cabels)?
Hello all,
We have an double D6/370 system with a problem at portside engine (compressor). When in gear at 2000 rpm the compressor is engaged. At 2100 it will release itself. It will drop in rpm but is engaged again at 2000 rpm etc etc. Starboard is working better, but will not go further than...
Had a small question about testing a D4 engine. Is it a lot of harm to the starter if the engine is started and stopped frequently within a very short time (1 to 2 minutes, sometimes with the regular stopbuttton, otherwise with the killswitch)? Can that damage the starter motor or is it designed...
Regarding this cleaning solution, what are the experiences with the inter cooler and heatexchangers on a Penta engine. Does it really work well or do you still need to dismantle the complete cooler to remove sand and clogged dirt.
After a auto-configuration of one of our vessels with EVC-C the option to configure the fuel sensor disappeared from the menu. Does anyone know how that is possible? Now we can not calibrate the system. With VODIA we tried an reload of the current software, but still the same problem. Please...
We have vessels with two new D6-370 engines with an EVC-E configuration. Immediately after starting both engines, the following message is displayed: high temperature exhaust gases, please reduce the revs. We find this strange, because that is impossible with a cold engine. We can push the...
After preforming maintainance on one of our boats (new compressor, turbo and alternator) the engine doesn't start anymore. Trim is still to high, but the trim and shiftactuator also doesn't work. After switching the current on the engine the EVC is lighting up but the clocks of the voltage...
Our boat with a Volvo Penta D6 300 engine is experiencing problems during a somewhat harder seagoing state. During testing on a flat sea there are no issues. Engine is good (3300 rpm) and steering / trim works fine. No EVC alarm. If the boat catches some waves then the engine goes down or to...
