I just checked the compression on my Oceanrunner, below are the results.Is this motor still within specification or due for a rebuild??<br /><br />100 102<br />100 102<br />90 95
I CLEANED AND REGAPPED MY PLUGS TODAY , 1 PLUG HAD CARBON BUILD UP,THE OTHER 5 LOOKED GREAT. DO I HAVE A COMPRESSION PROBLEM OR COULD IT BE SOMETHING ELSE.
Does any one know a site where they have pictures of what a spark plug out of a two stoke should like. I recently changed mine and one cylinder is running a little rich compared to the rest. I am also concerned that it may be running lean on the rest.<br /><br />1998 250 johnson oceanrunner
I have a 1998 250 hp Johnson Oeanrunner. I have been told in previous post the wot should be between 5500 and 6000 rpm. Local mech. says 4500 to 5500 rpm who is right?????????
My current set up is a 22' 1984 hydrasport walk around cuddy cabin . I have recently installed a 1998 250hp Johnson 30" shaft. My WOT is currently ranging from 5300 to 5600 depending on load. Am I in the ball park. I posted back in January and I have raised the motor one bolt hole as...
Can anyone tell me what the factory recommends for the WOT on this motor. I just had this motor put on my boat a 22' 1984 Hydrasport Walk Around.<br />THANKS
