GOOD NEWS. . . . The PICTURE UPLOAD FUNCTION IS WORKING !!! The tech folks at the parent company have been able to remedy the issue. You can upload pictures once again. Thank you for your patience.
Ok here's the problem. Last year I blew a head gasket and while I was trying to figure out the issue, I was playing with all the linkage and timing adjustments. I had the head milled and replaced the gaskets and she ran pretty good. But, it seemed like I wasnt able to rev as high as before at...
Found out my head gasket is blown. Got the head off, gasket came off easily, cleaned the surfaces with a plastic scraper. I will check the head on a glass plated and have it milled if necessary. But on the block side there is a pattern from the gasket in the metal of the surface. I really dont...
Hi all. Im fairly new to boating and outboards although Im mechanically inclined. I took my boat out scalloping last weekend and got in some shallow weeds, Im trimmed up as far as i could and put it just barely in gear and proceeded to move west. When the water became deep enough, I trimmed back...
