Re: Trim/Lift Valve Body re-assembly
Here's a photo of the re-worked port, re-tapped to 1/8NPT with progressively shorter taps to accommodate a full depth thread in the shallow blind hole. The brass fitting is shortened back slightly as well to ensure tightening on the tapered thread prior to...
Greetings all,
I've recently acquired a boat with a circa 1975-76 Chrysler 75HP....it's going to need some work, but currently trying to reassemble the tilt/trim valve body/pump that was included "loose" in a bag. One of the ports had the threads stripped out and I was able to repair that...
